Wireless Mice That Pair With Two Bluetooth Devices

By TechItSpot · Research-based buying guide. Updated 2026-10-14. How we compare products

Quick decision

TECKNET TK-MS029 explicitly documents two Bluetooth connections plus a receiver connection. Lift is the vertical alternative, with Bluetooth pairing on its Easy-Switch channels. These mice switch the active host; a three-device label alone does not prove three Bluetooth connections.

Sources checked . This is a comparison of documented features. We have not tested these products.

Choose by your requirements and check the documented limitations.
OptionChoose it when Limits to checkEvidence
TECKNET Wireless Mouse, Side Scroll Bluetooth Rechargeable, 3-Device | Switch Among 3 Devices, 6 DPI Levels (up to 4800 DPI), BT 5.3/5.0/2.4G USB-A, Quiet Clicks, 7 Buttons, Ergonomic, Black Two Bluetooth hosts plus a receiver

Two Bluetooth channels plus a USB-A receiver connection, six sensitivity settings and a dedicated side wheel.

The side wheel is not officially supported on macOS. Buttons are not programmable. TECKNET Ergo Tri-Mode Silent Mouse TK-MS029
Logitech Lift Vertical Ergonomic Wireless Mouse - Rose Vertical shape for two computers

Bluetooth on selectable Easy-Switch channels, a stored Bolt receiver and AA power. Logitech sizes Lift for small to medium hands.

The channel button is underneath. Small-to-medium hand sizing; AA-powered. Logitech Lift getting startedLogitech Lift, Rose, consumer model

Two Bluetooth computers need two stored Bluetooth pairings. A product advertised for three devices may count a USB receiver among those connections, so the total device number is not enough.

This shortlist uses an explicit two-Bluetooth-channel specification for TECKNET and the documented channel-by-channel Bluetooth pairing procedure for Lift. Both switch which device is active; this guide does not claim simultaneous control of two computers.

We may earn a commission at no extra cost to you.

The picks

#1 Two Bluetooth hosts plus a receiver
TECKNET Wireless Mouse, Side Scroll Bluetooth Rechargeable, 3-Device | Switch Among 3 Devices, 6 DPI Levels (up to 4800 DPI), BT 5.3/5.0/2.4G USB-A, Quiet Clicks, 7 Buttons, Ergonomic, Black

TECKNET Wireless Mouse, Side Scroll Bluetooth Rechargeable, 3-Device | Switch Among 3 Devices, 6 DPI Levels (up to 4800 DPI), BT 5.3/5.0/2.4G USB-A, Quiet Clicks, 7 Buttons, Ergonomic, Black

4,768 Amazon ratings

The manufacturer specifies the exact two-Bluetooth-plus-USB-A split. The side wheel is not officially supported on macOS. Buttons are not programmable.

    #2 Vertical shape for two computers
    Logitech Lift Vertical Ergonomic Wireless Mouse - Rose

    Logitech Lift Vertical Ergonomic Wireless Mouse - Rose

    13,996 Amazon ratings

    Pair each Bluetooth host on a separate Easy-Switch channel. The channel button is underneath. Small-to-medium hand sizing; AA-powered.

      Why these models

      TK-MS029 is included because the manufacturer explicitly separates two Bluetooth connections from its USB-A receiver connection. Lift is the vertical alternative because its setup guide documents Bluetooth pairing on selected Easy-Switch channels. Device-count advertising alone was not our selection rule, and we have not measured switching speed.

      Count Bluetooth channels, not just advertised devices
      Connection questionTECKNET TK-MS029Logitech Lift
      Bluetooth host capacityTwo Bluetooth connections documentedBluetooth pairing on selected Easy-Switch channels; up to three devices
      Receiver connectionAdditional 2.4 GHz USB-A connectionLogi Bolt receiver is an alternative connection
      Changing the active hostManufacturer describes one-button device switchingEasy-Switch button underneath
      What is not demonstrated hereSimultaneous control, switching latency or cross-computer file transferSimultaneous control or hands-on behavior of multi-computer software

      Set up two Bluetooth computers with Lift

      Pair each computer to a different channel. Reusing the same channel for a second host is different from storing two independent pairings. These are documented setup steps, not a report of our testing.

      1. On Lift, select a free Easy-Switch channel and hold the button for three seconds if the LED is not blinking rapidly.
      2. Add Lift in the first computer's Bluetooth settings.
      3. Select another channel, enter pairing mode and add Lift in the second computer's Bluetooth settings.
      4. Press the channel button to choose the computer you want to control. Keep track of which channel belongs to which host.

      Sources: Logitech Lift setup and controls · Microsoft: pair a Bluetooth device · Apple: connect a wireless accessory

      Check what the third connection means

      For TK-MS029, two Bluetooth hosts plus one receiver host account for its three-device description. Its Bluetooth version numbers are not counts of independent pairings. Follow that exact model's instructions for its mode and pairing controls; Lift's button sequence should not be copied to a different mouse.

      If you want the pointer to travel automatically between computers, treat that as a separate software requirement. Neither this channel table nor a three-device label proves that capability.

      Sources: TECKNET TK-MS029 manufacturer specifications · Logitech Lift setup and controls

      Not sure it will fit your hand?
      Use the Office Mouse Finder to sort by estimated hand range, filter documented features and shape, and compare two or three mice side by side.

      What to look for

      Count documented Bluetooth pairing channels rather than radio version numbers.

      Changing the active host is different from simultaneously controlling several computers.

      Our guides use published specifications and Amazon listing information, with AI assistance in research and drafting. We do not conduct hands-on testing. Amazon customer ratings are not our own scores. Prices and availability change frequently — always confirm on Amazon before buying.