Monitors That Actually Support DisplayPort Daisy Chaining
Daisy chaining lets you run two or more monitors off a single DisplayPort output on your laptop or dock, using MST (Multi-Stream Transport) to pass the signal from one screen to the next. That's a specific spec, not a given on most monitors — plenty of 4K and ultrawide displays skip it even when they have USB-C or a full port cluster.
Only a handful of monitors in this pool state daisy chain support outright, so those come first. The rest are here because they solve the same workstation problem a different way: a USB-C hub that docks your laptop with one cable, even without MST pass-through to a second display.
If true daisy chaining across multiple monitors is the requirement, stick to the top two. If you just need one cable to handle video, power, and peripherals for a single-monitor desk, the alternatives below are worth a look.
We may earn a commission at no extra cost to you.
ASUS ProArt PA278CV 27 Inch 1440p QHD USB-C Professional Monitor | Calman Verified, Delta E < 2, Daisy Chain, USB Hub, IPS,Ergonomic Stand, 100% sRGB, Eye Care, Rec.709
This is the clearest daisy chain pick in the pool: ASUS specs it as supporting up to four displays chained off DisplayPort, and it pairs that with Calman-verified color accuracy and 65W USB-C power delivery, so a multi-monitor workstation doesn't have to sacrifice color for convenience.
- +Calman Verified with Delta E < 2 for accurate color
- +100% sRGB and 100% Rec. 709 coverage
- +65W USB-C Power Delivery in one cable
- −QHD resolution, not 4K, on a 27-inch panel
- −No specs suggesting high refresh rate for gaming
ASUS ProArt PA247CV 24 Inch 1080p USB-C Professional Monitor | Calman Verified, Delta E<2, Daisy Chain, IPS, USB-C PD 65W, Ergonomic Stand, 100% sRGB, HDMI
Same ASUS ProArt daisy chain feature set as the PA278CV, but at 1080p instead of QHD, which lowers the bandwidth demand per display if you're chaining two or more screens off a single DP line. A reasonable choice if resolution matters less than getting the chain to run cleanly.
- +Factory-calibrated with Delta E < 2 accuracy
- +100% sRGB and Rec. 709 color coverage
- +USB-C with 65W Power Delivery, single-cable setup
- −1080p resolution limits sharpness and screen real estate
- −Glossy screen surface, more prone to glare
Dell UltraSharp U2723QE 27" 4K USB-C Hub Monitor
Doesn't list daisy chain, but its built-in USB-C hub with gigabit Ethernet and 90W power delivery covers the other half of a workstation setup: one cable for video, data, network, and laptop charging. Worth considering if your real need is desk simplicity rather than chaining a second screen.
- +IPS Black panel with 2000:1 contrast
- +Full USB-C hub with 90W power delivery
- +Built-in gigabit Ethernet
- −60Hz only — not for competitive gaming
- −Speakers not included
LG 27UP850K-W 27-inch Ultrafine 4K UHD IPS Monitor, White | 60Hz, DisplayHDR 400, USB Type-C 90W PD, Tilt/Height/Pivot Adjustable Stand, Built-in Speaker
No daisy chain spec here either, but 90W USB-C and a fully adjustable stand make it a strong single-cable workstation display for anyone prioritizing 4K sharpness and DCI-P3 color over multi-monitor chaining.
- +90W USB-C powers a laptop with a single cable
- +95% DCI-P3 color gamut suits color-sensitive work
- +Height, tilt, and pivot adjustable stand
- −60Hz refresh rate limits fast-paced gaming
- −DisplayHDR 400 is an entry-level HDR tier
Dell 27 Monitor S2725QC, 4K UHD IPS, 120Hz, 99% sRGB, 4ms, FreeSync Premium | 3840x2160, 163 PPI, USB-C, HDMI, DisplayPort, Anti-Glare, Eye Comfort Technology, LED Edgelight System
A 4K USB-C docking monitor with 120Hz and FreeSync Premium, useful for a workstation that also handles some gaming or fast-motion content. Not a daisy chain monitor, but its 163 PPI and single-cable setup make it a solid stand-in if chaining isn't a hard requirement.
- +163 PPI delivers sharp text and fine detail
- +120Hz with FreeSync Premium smooths motion
- +Single USB-C cable with 65W power delivery
- −Only sRGB coverage confirmed, no wider gamut listed
- −Stand adjustability not specified in listing
What to look for
Daisy chain support depends on DisplayPort version and MST, not just having a DisplayPort output. A monitor needs DP 1.2 or newer with MST enabled, and every display in the chain has to support it too — mixing a daisy-chain monitor with one that lacks output-side DisplayPort won't work. Check that the resolution and refresh rate you want are achievable across the full chain, since bandwidth gets split between displays; running two 1440p screens off one DP 1.2 line is realistic, two 4K screens usually isn't without DP 1.4 or higher.
If a monitor's spec sheet doesn't mention daisy chain or MST, assume it doesn't have it, even if it has a full set of video inputs. USB-C monitors with a built-in hub solve a related but different problem: they let one cable carry video, data, and laptop charging, which is what most single-monitor workstation setups actually need. Don't confuse that hub functionality with the ability to feed a second monitor from the first one's DisplayPort out.
This guide is compiled from manufacturer specifications and aggregated customer feedback on Amazon, with AI assistance in drafting. We have not personally tested every product listed. Prices and availability change frequently — always confirm on Amazon before buying.